95% 99% 99.5% Alumina Ceramic Square Ring / Ceramic Frame Alumina Ceramic Parts
Alumina is kind of structural ceramic with the performance of good insulation , accurate size,high electrical insulation, high mechanical strength, high wear and chemical resistance. Using purity material and particular glazing process ensure to get the splendid surface.
Innovacera provides state-of-the-art technical ceramic manufacturing by the most cost-effective processes.
MingRui maintains efficient manufacturing facilities that support quick-turn prototype development and high volume production.
■Good smoothness / flatness with less porosity. Excellent in adhesion with thin film and thick film materials.
Industrial Ceramic Ring with Less variance in outline, plate thickness, slit pitch, etc.
■Minimal warpage, bending, and undulation.
■Physical and chemical properties are stable even under a hot environment. Excellent in thermal shock resistance. High thermal conductivity and coefficient of thermal expansion similar to that of silicon.
■Superior mechanical strength. Products with higher mechanical strength are also in our lineup.
■Excellent resistance against oil and chemical.
■Excellent in insulation properties, high dielectric breakdown voltage, high surface resistivity / volume resistivity, and small dielectric constant.
■Stable breaking strength, and less variance in shape or dimensions.
■The high reflective substrate, especially suitable for optical applications such as LED, is also available.
Applications of Ceramic Seal Faces
LED packages, Ceramic Laser Reflector for chip resistors, HIC substrates for heat dissipation, Power modules, FAX substrates for thermal printer head
*Various processing is available (thin film metalization, thick film metalization, glaze, etc.)
This Industrial Ceramic Ring is characterized by its extremely high strength and thermal conductivity. The outstanding surface quality on both sides makes it the perfect companion for any commercial thick film paste and even makes it suitable for a number of thin film applications (sputtering).
With its extremely fine surface quality, Industrial Ceramic Ring is designed especially to meet the highest demands in thin-film technology.
Industrial Ceramic Ring offers consistently reliable and convincing performance even when subject to high thermal and electrical loads in terms of its:
Thermal shock resistance
Industrial Ceramic Ring Features :
1) High hardness, high strength, high wear and chemical corrosion resistance, low expansion coefficient.
2) Good wear-resistant.
3) High corrosion-resistant.
4) Long Time warranty.
Various sizes available, and we can customize as your requirement.
Small Ceramic Block /Ceramic Block Insulation :
Alumina substrates can withstand high temperature and maintain high strength and hardness. Alumina plates also have superb performances in electrical insulation, high chemical resistance and low thermal expansion. We have various sizes of semi finished shapes in stock and are able to conduct custom manufacturing for all kinds of alumina components.
Industrial Ceramic Ring Specifications
1. material : zirconia ceramic
2. Very small and very large size can be made
3. High temperature, good abrasive.
Refractory alumina ceramic substrate/ceramic plate is our main product.Misson can supply high quality alumina plates with competitive prices.
Very small and very large sized plates can be made.
Fine grinding can made tight tolerance.
High temperature and abrasive resistance is good
1. High heat resistance : Alumina ceramic has excellent thermal stability,which means that it is widely used in areas where resistance to high temperatures is essential.
2. Good wear resistance : Alumina eramic is the material of choice for wear parts.
3. High corrosion resistance : It is insoluble in water and only slightly soluble in strong acid and alkaline solutions. Good chemical stability of alumina leads to high corrosion resistance.
Alumina ceramic is the most mature of the engineering ceramics, offering excellent electrical insulation properties together with high hardness and good wear resistance,but relatively low strength and fracture toughness.Alumina ceramics are generally white but may also be pink or ivory.The color is derived from either the sintering additives or impurities in the raw materials.
Properties of Alumina and Zirconia Ceramic :
||g / cm³
|Coefficient of thermal expansion
|Modulus of Elasticity Young's Mod
|HV Hardness HV
|Flexural Strength @ room temperature
|Flexural Strength @700°C
|Compressive Strength @ room temperature
||MPa *m 1/2
|Heat conductivity @ room temperature
|Electrical Resistivity @ room temperature
|Max use temperature
|Resistance to acid alkaline
|Thermol Shock Resistance
||△ T ( °C )
|Tensile Strength @ 25 °C
We ( Dongguan Mingrui Ceramic Technology Co., Ltd ) are a professional manufacturer specialized
in R&D, manufacturing and selling customized all kinds of high precision zirconia and alumina ceramic parts . Our main products include ceramic rod , ceramic tube, ceramic plunger, ceramic valve, ceramic plate, ceramic shaft and bearing , ceramic nozzle etc , which are mainly used in industrial fields of Machinery, Petrochemical oil and gas, Valves, Automotive, Food Processing, Fluid Handling, Process Control, Thermal Processing, Aerospace, Defense, Eletronic and Electrical, Textile, Mechanical, Engineering, Mineral Processing, etc.
We have a full service include mold design and development , ceramic forming , precision machining
and precision detection technology. We have achieved great successes in particular requirements
which is based on cooperating with Tsinghua University and getting rich experience by our professional technical engineer teams . Our factory have an unique technical called mirror polishing which improve
our products more smooth , bright than other competitors.
Our High precision Machining Machine :
Laser Cutting machine making holes :
1. What kind of industry ceramics do you have ?
We specialized in 95% 97% 99% alumina ceramic and zirconia ceramic parts .
2. What kind of molding method do can you supply ?
Dry Pressing , isostatic pressing , grouting , hot-chamber die casting , tape casting , injection molding, etc, injection molding and isostatic molding is the most commonly used.
3.What stabilizer do you use when processing ?
Yttria stabilizer is the most commonly used in our industrial ceramic parts.
4.Can you produce free samples for me ?
Yes usually , we can produce free samples for you but it is up to the product complexity .
5.What terms can you accept for payment ?
T/T, L/C , Western union , Money Gram and Paypal is welcome , but paypal and western union only for small -sum payment.