Insulating Precision Machinable Ceramic Block Machining Ceramic Parts Drilling Hole
Alumina Ceramic or Zirconia Ceramic, for Alumina, the purity would be 95% or 97% or 99.99%,
For Zirconia, the purity usually be 95% , the balance 5% sould be additive material.
We also can provide electronic ceramics, the material is Aluminium nitride , it is a very special ceramic material, there are both excellent Electrical insulation and Thermal conductivity. This Aluminium nitride ceramics widely be taken in electronic application.
Lapping Polish Maching
Centerless Grinding Machine
Milling Drilling Maching
MingRui Ceramic can make all the size as bellow:
shape in cylinder, diameter 0.3-100 mm, length up to 300 mm;
shape in plate, length and width up to 100 mm, thickness0.2-50 mm;
shape in through hole, Diameter 0.10-100 mm;
shape in blind hole, diameter 0.45-100 mm;
shape in Groove or slot, depth up to 50 mm, width 0.1 mm at least.
Typical for the applications of technical ceramic materials is a frequent requirement for other non-electrical properties such as:
- Mechanical strength
- Thermal resistance
- Thermal shock resistance
- Thermal conductivity
- Corrosion resistance
- Production of ultrahigh-vacuum-capable joints with metals
A key strength of this class of materials is the demand-driven combinations of the above-mentioned properties. In addition comes the possibility to optimize properties for a specific application by means of appropriate doping and therefore to tailor materials to requirements.
For instance, the zirconia ceramics used for λ sensors can be optimized to maximize their strength without compromising their suitability for use as oxygen sensors as only one electrical signal must be recorded, which can be evaluated on the basis of appropriate calibration. With the selective modification of the chemical composition of this material, maximized electrical conductivity can be obtained along with an acceptable level of strength. As a result, this anionic conductor can be efficiently used as electrolyte for SOFCs (high-temperature fuel cells).
Alumina Ceramics; Ceramic Cutting Blade; Ceramic Filling Pump; High Temperature Ceramics, Zirconia Ceramics
- High hardness
- Wear & abrasion resistant
- High compressive strength
- High mechanical Strength
- Resists strong acid and alkali attack at high temperatures
- Excellent electrical insulation properties
- High thermal conductivity
- Excellent refractory material
- Very specific thermal conductive and thermal expansion rates
- Low density
- Resistant to thermal shock
- High dielectric strength
- Transparent to microwave radio frequencies
Zirconia ceramic are used in shaft , plunger, sealing structure, auto mobile Industrial, oil drilling equipment, Insulation parts in electrical equipment , ceramic knife, ceramic hair clipper spare parts, with high density, bending strength and breaking tenacity.
We can supply the products according to customer's drawings, samples and performance requirement.
precison ceramic, precision ziconia ceramic, zirconia, ceramic part, ceramic structure, zirconia ceramic shaft sleeve pipe roller tube, zirconia ceramic shaft piston and gear, Zirconia ceramic rod, machinable ceramic rod for industry
||Insulating Precision Machinable Ceramic Block Machining Ceramic Parts Drilling Hole
||zirconia or alumina ceramic
||According to drawings
||Full Ceramic, Ceramic+Steel
||15 - 20days
||Air Express (DHL/UPS/TNT/ FedEx) or Ocean Shipping
Properties of Alumina and Zirconia Ceramic :
||g / cm³
|Coefficient of thermal expansion
|Modulus of Elasticity Young's Mod
|HV Hardness HV
|Flexural Strength @ room temperature
|Flexural Strength @700°C
|Compressive Strength @ room temperature
||MPa *m 1/2
|Heat conductivity @ room temperature
|Electrical Resistivity @ room temperature
|Max use temperature
|Resistance to acid alkaline
|Thermol Shock Resistance
||△ T ( °C )
|Tensile Strength @ 25 °C
We ( Dongguan Mingrui Ceramic Technology Co., Ltd ) are a professional manufacturer specialized
in R&D, manufacturing and selling customized all kinds of high precision zirconia and alumina ceramic parts . Our main products include ceramic rod , ceramic tube, ceramic plunger, ceramic valve, ceramic plate, ceramic shaft and bearing , ceramic nozzle etc , which are mainly used in industrial fields of Machinery, Petrochemical oil and gas, Valves, Automotive, Food Processing, Fluid Handling, Process Control, Thermal Processing, Aerospace, Defense, Eletronic and Electrical, Textile, Mechanical, Engineering, Mineral Processing, etc.
We have a full service include mold design and development , ceramic forming , precision machining
and precision detection technology. We have achieved great successes in particular requirements
which is based on cooperating with Tsinghua University and getting rich experience by our professional technical engineer teams . Our factory have an unique technical called mirror polishing which improve
our products more smooth , bright than other competitors.
Application Industry :
1. Are you a manufacturer ?
Yes we are a ceramic manufacturer . We proceed with the whole process start from Powder material to forming , sintering , machining, marking , inspection , packing , we do the whole process .
2. What kind of industry ceramics do you have ?
We specialized in 95% 97% 99% alumina ceramic and zirconia ceramic parts .
3. What kind of molding method do can you supply ?
Dry Pressing , isostatic pressing , grouting , hot-chamber die casting , tape casting , injection molding, etc, injection molding and isostatic molding is the most commonly used.
4.What stabilizer do you use when processing ?
Yttria stabilizer is the most commonly used in our industrial ceramic parts.
5.Can you produce free samples for me ?
Yes usually , we can produce free samples for you but it is up to the product complexity .
6.What terms can you accept for payment ?
T/T, L/C , Western union , Money Gram and Paypal is welcome , but paypal and western union only for small -sum payment.