Yttria Stabilized Zirconia Ceramic Rod / Small Ceramic Bar with High Hardness
Zirconia Ceramic Rod / Small Ceramic Bar
Our Factory Mingrui Ceramic Technology custom various size of Zirconia Ceramic Rod / Small Ceramic Bar with diameter 0.5mm 1mm 2mm 3mm , the surface is fine polished with good Roughness as fine as
Ra 0.02, the smallest ceramic rod we can make diameter as thin as 0.4mm , tolerance ±0.001mm .
The Making process ofZirconia Ceramic Rod / Small Ceramic Bar :
1. zirconia powder --- forming--- sintering---machining Outer diameter --- Chamfer ends ---- inspection
---packing---ship out
Zirconia Ceramic Rod / Small Ceramic Bar Features :
1. Zirconia ceramic rod has the highest strength and toughness at room temperature of all the advanced ceramic materials. The fine grain size allows for extremely smooth surfaces and sharp edges.
2. Excellent thermal insulation/low thermal conductivity (2.5 to 3 W/mK),
3. Very high resistance to crack propagation, high fracture toughness (6.5 to 8 MPam1/2).
| Product Name |
Zirconia Ceramic Rod / Small Ceramic Bar |
| Material |
zirconia ceramic |
| Color |
white or black ,blue or custom |
| Standard |
according the request of customer |
| precision |
0.001mm |
| diameter |
0.4-200mm |
| length |
5-400mm |
| Used |
Refractory Zirconia Ceramic Rod / Rod Ceramic High Hardness |
All kinds of Zirconia Ceramic Rod / Small Ceramic Bar we provide :
1.High Pressure Machinable Zirconia Ceramic Rod Corrosion Resistance
2.Zirconia Ceramic Threaded Rod with Thread Screw Flat Position Stepped Chamfer
3.White Zirconium Oxide Rod Chamfered Ceramic Rod Precision Machining
4.Corrosion Resistant Zirconia Ceramic Stirring Rod with Step Slot
5.Diameter 1mm 2mm 3mm Zirconia Ceramic Rod China Manufacturer
6.Advanced Ceramic Bar with Machined Groove Engineering Ceramic Rod
Industrial Ceramic Rod Intriduction
Zirconia Ceramic Rod / Small Ceramic Bar is the most widely applied and cost effective technical ceramic material. It offers a combination of superior mechanical strength and electrical properties, wear resistance and corrosion resistance. The maximum working temperature is up to 1700 °C with relatively high thermal conductivity. It is also an electrically insulating material with a high electrical resistivity. The good corrosion resistance makes it insoluble in water and slightly soluble in strong acid and alkaline solution.
Material Properties:
| |
95% Alumina |
99% Alumina |
Zirconia |
Silicon carbide |
Silicon nitride |
Aluminum nitride |
Machinable ceramic |
| Colour |
white |
Light yellow |
white |
black |
black |
gray |
white |
| Density (g/cm3) |
3.7g/cm3 |
3.9g/cm3 |
6.02g/cm3 |
3.2g/cm3 |
3.25g/cm3 |
3.2g/cm3 |
2.48g/cm3 |
| Water Absorption |
0 % |
0 % |
0 % |
0 % |
0 % |
0 % |
0 % |
| Hardness(HV) |
23.7 |
23.7 |
16.5 |
33 |
20 |
- |
- |
| Flexural Strength(MPa) |
300MPa |
400MPa |
1100MPa |
450MPa |
800MPa |
310MPa |
91MPa |
| Compressive Strength(MPa) |
2500MPa |
2800MPa |
3600MPa |
2000MPa |
2600MPa |
- |
340MPa |
| Young's Modulus Of Elasticity |
300GPa |
300GPa |
320GPa |
450GPa |
290GPa |
310~350GPa |
65GPa |
| Poisson's Ratio |
0.23 |
0.23 |
0.25 |
0.14 |
0.24 |
0.24 |
0.29 |
| Thermal Conductivity |
20W/m°C |
32W/m°C |
3W/m°C |
50W/m°C |
25W/m°C |
150W/m°C |
1.46W/m°C
|
| Dielectric Strength |
14KV/mm |
14KV/mm |
14KV/mm |
14KV/mm |
14KV/mm |
14KV/mm |
14KV/mm |
| Volume Resistivity(25ºC) |
>1014Ω·cm |
>1014Ω·cm |
>1014Ω·cm |
>105Ω·cm |
>1014Ω·cm |
>1014Ω·cm |
>1014Ω·cm |
This data is typical for laboratory testing and the actual characteristics of a particular production batch may vary.
Machining Accuracy
(1) Axis: roundness 0.002 mm, concentricity 0.002 mm, smoothness Ra0.1;
(2) Hole: the minimum processing hole diameter is 0.2 mm and the depth is up to 6 mm (depending on the material);
(3) Slot (seam): a minimum of 0.1 mm narrow groove, and grooves of various shapes;
(4) Plane: 0.1MM sheet with minimum processable thickness, parallelism 0.001mm, measurement tolerance 0.001 mm, finish Ra0.1;
(5) Thread: The minimum Machinable M2 internal thread, the accuracy of GB-7h, the external thread size is not limited, the accuracy is GB-6g.
Company Description
Mingrui Ceramics has years of experience designing and developing technical ceramic solutions for a wide variety of applications and industries.High Temperature Refractory Ceramic Threaded Rod Silicon Wafer Cutting Machine. We offer this expertise to all of our customers to ensure the best design and materials are chosen for their specific application and needs.High Temperature Refractory Ceramic Threaded Rod Silicon Wafer Cutting Machine,Typically, our custom technical ceramic components and parts we supply are used for one of three main reasons:
Mingrui Ceramics is one of the world’s premiere technical ceramic suppliers – contact us to see what technical ceramics we can create for you.
Zirconia Ceramic Rod / Small Ceramic Bar more Photos :
Our High Precision machining work:
Delivery:
Custom OEM will be shipped within 15 days after determining the parameters
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations (the price,delivery time,moq etc)about the ceramic plates, please contact us or email:admin@cerampart.com
CEO: Admin deng
Dongguan Mingrui Ceramic Tech. Co. Ltd.
Add: No.21 Chuangxing Rd., 2nd Industrial Zone of Shangsha,
Chang'an town, Dongguan city, Guangdong, China 523867
Email: admin@cerampart.com
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Your message must be between 20-3,000 characters!
